Foldable Car Windshield Sun Shade Umbrella

A compact windshield cover that opens like an umbrella and stores neatly when the road calls.

Parking in direct sunlight can leave the steering wheel, dashboard and seats uncomfortably hot. This umbrella-style windshield shade creates a reflective barrier inside the front glass without the folding and wrestling associated with a conventional rigid sunshade.

Open it inside the vehicle, position it against the windshield and fold it into the supplied sleeve when you are ready to drive.

Made for Everyday Parking

The silver-colored outer surface faces the windshield to help block direct sunlight from entering the parked vehicle. A dark cabin-facing surface creates a clean appearance from inside the car.

Its umbrella-style frame spreads the shade across the glass while allowing it to collapse into a narrow, portable form. Store it in the glove compartment, door pocket or trunk instead of leaving a large folded panel across the rear seat.

 At a Glance

 Approximate open size: 55 × 31 in / 140 × 79 cm

 Umbrella-style folding frame

 Reflective silver windshield-facing surface

 Dark interior-facing surface

 Compact manual opening design

 Protective storage sleeve included

Custom logo and packaging options

Intended for parked vehicles only

Check the Fit Before Ordering

The supplied size drawing shows an approximate open measurement of 55 × 31 inches. Windshield shapes vary between sedans, hatchbacks, SUVs and commercial vehicles, so fit should be checked by measurement rather than vehicle category alone.

Measure:

1. The clear width of the windshield.

2. The glass height from the dashboard to the roof lining.

3. The size and position of the rear-view mirror.

4. Any camera or sensor housing near the top center of the glass.

A small amount of overlap is usually acceptable because the canopy is flexible. However, a shade that is substantially wider or taller than the available glass area may not open correctly.

 Why Use an Umbrella-Style Windshield Shade?

 Opens Without Complicated Folding

The multi-rib frame opens in a familiar umbrella motion. There is no need to twist two large wire rings or fold several rigid panels in a specific sequence.

 Stores in a Smaller Space

Once folded, the shade slides into its protective sleeve. This keeps the product contained and helps prevent the frame from catching on other items in the vehicle.

Covers the Main Glass Area

The rectangular canopy shape is designed for a front windshield rather than a circular rain-umbrella profile. Shaped corners help provide coverage around the dashboard and upper windshield area.

Suitable for Custom Branding

Logos can be added to selected canopy panels or the storage sleeve, making the product suitable for automotive retailers, dealerships, car-care brands and promotional programs.

How to Use It

 1. Open Inside the Vehicle

Park safely, switch off the engine and unfold the shade inside the cabin. Keep the reflective surface facing the windshield.

2. Position Against the Glass

Place the canopy across the front windshield. Adjust it around the rear-view mirror and any sensor housing without forcing the frame.

3. Secure the Shade

Rest the lower portion near the dashboard. Depending on the vehicle, the sun visors may be lowered to help hold the upper edge in position.

 4. Remove Before Driving

Fold the shade completely and return it to the storage sleeve before starting the vehicle.

This product must never obstruct the driver’s view while the vehicle is moving.**

 Product Construction

The product shown uses a rectangular canopy supported by a folding umbrella frame. The silver-colored face is positioned toward the windshield, while the darker side faces the cabin.

The compact handle provides a grip for opening, positioning and removing the shade. A matching sleeve protects the folded canopy during storage.

Available production options may include:

* Alternative open sizes

* Silver or dark exterior finishes

* Custom canopy colors

* Logo printing on selected panels

* Branded storage sleeves

* Product labels and barcodes

* Retail boxes or polybag packaging

* Custom instruction cards